EnviroCare is often asked to move air conditioning outdoor units because of terrace renovations, glass curtains, building work or complaints about noise and access.
It is not a simple lift-and-shift job. Refrigerant, electrical connections, pipework and drainage all need to be handled correctly.
Why a qualified engineer is needed
The refrigerant in the system must be recovered safely before the unit is disconnected. Releasing refrigerant into the atmosphere is not acceptable and can damage the system.
Use a qualified F-Gas engineer for the move.
What the work involves
The engineer will usually:
- isolate the power
- recover the refrigerant
- disconnect pipework and electrical connections
- remove the outdoor unit from its brackets or base
- check the new position for airflow, access and drainage
- reconnect the pipework and electrics
- pressure-test and leak-test the system
- vacuum and recharge the system where required
- test cooling and heating operation
Choosing the new position
The outdoor unit needs clear airflow, a stable fixing, safe access for servicing and a drainage route that will not cause problems for neighbours or the building.
If the new position is too enclosed, too hot or too difficult to service, the unit may become noisy, inefficient or unreliable.
EnviroCare can inspect the current location and advise whether moving the unit is practical before renovation work starts.